 | Clogged Bathtub Drain |
|
|
Question: Just a basic question of how to unclog. The water does go down the drain, albeit very very slowly. I'm sure this is due to an accumulation of hair/gunk. I can't figure out how to remove the drain cap. It is the type with a knob that you rotate about 1/4 turn to collapse it to be able to take a bath, and a 1/4 turn the other way to keep it raised for showering. It will not unscrew. I thought I would first try to unscrew the cap to see if I could access the clog, but I can't even unscrew the cap. I don't want to have to call a plumber - I'm sure with the right advice this has to be a simple thing. Should I apply a commercial drain clog product? Is there a simple way to remove the drain cap that I don't know?
Answer: Leave the drain cap alone. Remove the overflow/trip lever faceplate. You can run a small snake down that. Or...connect the Shop Vac and suction at the drain. Cover the o'flow opening with wet rags. There is nothing "usual" or "standard" about tub drain clogs. There are a dozen different drain layouts and fittings and while some clogs are near the tub, others can be as far removed as the lav basin tie-in. You play it by ear and try things till it flows freely., I discourage chemicals because they don't touch the hair clogs but DO attack many of the piping materials.
|
 |
|
| |
Submit Your Question
Home